I would like to use the 8M to supply a normally open momentary ground.
I need a one tenth second ground pulse output every 3 seconds, but without having this same output going high.
The brief load when low is less than 5mA.
I understand that a high, nap, low ... loop will control my transistor which in turn will supply my ground pulse, but_
I'd rather not waist the transistor and extra resistors if there's a command solution or better approach.
Is there another option, for example a pin condition set as open by waiting for input, or ..., that I'm overlooking?
The use is for a device that is constantly on but is only activated by momentary ground input (and high to this input would be bad).
Thank you,
dchurch56
I need a one tenth second ground pulse output every 3 seconds, but without having this same output going high.
The brief load when low is less than 5mA.
I understand that a high, nap, low ... loop will control my transistor which in turn will supply my ground pulse, but_
I'd rather not waist the transistor and extra resistors if there's a command solution or better approach.
Is there another option, for example a pin condition set as open by waiting for input, or ..., that I'm overlooking?
The use is for a device that is constantly on but is only activated by momentary ground input (and high to this input would be bad).
Thank you,
dchurch56