Hi Peter,I want to do some high side low power swithching with a picaxe. Can anyone recommed a suitable TO92 style or similar device? I thought there would be a P channel version of the 2N7000 but cannot seem to find it!
Thanks Peter
It might be an idea to tell us what supply voltage you are using to run the PICAXE.I want to do some high side low power switching with a picaxe
Using a P Channel MOSFET to switch your loads to +5V should be OK but for switching using a +12V supply you will need a level converter. Alternatively can you configure your loads to switch the 0V side rather than the positive supply side?Its 5v & 12v at around 20ma so the ZVP2106A should cope easily with this from its data of -60v and 280ma. Looking forward to trying them. Thanks