These new ones are from SunrayRF, and are US$13 each for the 1E80's and US$14.50 for the 1E86's. Both of these modules output 100mW maximum. All three are self-forming, self-healing MESH network type. The 1E28's are US$32 each, but at 500mW output power, are not legal without a license. You can fully control the settings of these in software including the output power. Even the 100mW versions will need the wick wound down a bit to be compliant, but you can configure them to be just that with the software. The 80's and 86's have -113dB receive sensitivity, and the 28's have -116dB receive sensitivity - pretty good! The 80's are TTL interface only, but the other two are TTL/RS232/RS485.
PDF is attached here for others to read.
They are not yet up on the SunrayRF website, but if you visit Sunrayrf.com, you can email any of their support team(or use the email at the end of the PDF), if you wanted to buy some.
I have ordered 4 of the 80's and 86's to play with.
PDF is attached here for others to read.
They are not yet up on the SunrayRF website, but if you visit Sunrayrf.com, you can email any of their support team(or use the email at the end of the PDF), if you wanted to buy some.
I have ordered 4 of the 80's and 86's to play with.
Attachments
-
279.3 KB Views: 48