Can I use a separate Terminal with a pre-programmed chip that uses the sertxd command as its output? (And use its program serial TX out pin as the output?) Normally I use this command as a debug tool as I am programming a chip while the serial output is connected to the computer for programming purposes.
In this case I like a pre-programmed 08M2 check a HR004 Sonar Unit and print out the value it detects through its sertxd command. I will use an other laptop as the Terminal.
In this case I like a pre-programmed 08M2 check a HR004 Sonar Unit and print out the value it detects through its sertxd command. I will use an other laptop as the Terminal.