StigOfTheDump
Senior Member
Hi
I have a project using an AXE134Y 4x20 OLED. I want to fit it into a box with transparent lid that I already have several of. The OLED board is a perfect fit but the serial board extends beyond the edge of it too far. I am going to cut this board just behind where the download socket would be so that it is flush with the OLED board. I will then solder the 10k resistor to the 22k and solder the other end into the 0v VR1 hole. I will need to remove the 18M2 if I ever need to reprogram it.
Can anybody see anything that I may have missed.
Stig
I have a project using an AXE134Y 4x20 OLED. I want to fit it into a box with transparent lid that I already have several of. The OLED board is a perfect fit but the serial board extends beyond the edge of it too far. I am going to cut this board just behind where the download socket would be so that it is flush with the OLED board. I will then solder the 10k resistor to the 22k and solder the other end into the 0v VR1 hole. I will need to remove the 18M2 if I ever need to reprogram it.
Can anybody see anything that I may have missed.
Stig