the old fart
Senior Member
Hi Guys,
With reference to my project, large miniature railway.
http://www.picaxeforum.co.uk/showthread.php?28328-help-needed-with-I2C&highlight=railway
I've been asked if the signals can be controlled by radio link, ie xbee.
I have read the Xbee tutorial and datasheets.
So I have a few questions that I hope will help me to decide which direction to go, or not, as the case may be.
A. Due to distance and a building I would need to use Xbee Pro, with additional aerial. Would this work up to 60M distance.
B. About 10 remote locations, Can I use 1 master Picaxe to talk to all remote picaxes?
C. What effect would Radio Controlled Trucks, on 2.4gh, have on the Xbee signal?
Thanks.
TOF
With reference to my project, large miniature railway.
http://www.picaxeforum.co.uk/showthread.php?28328-help-needed-with-I2C&highlight=railway
I've been asked if the signals can be controlled by radio link, ie xbee.
I have read the Xbee tutorial and datasheets.
So I have a few questions that I hope will help me to decide which direction to go, or not, as the case may be.
A. Due to distance and a building I would need to use Xbee Pro, with additional aerial. Would this work up to 60M distance.
B. About 10 remote locations, Can I use 1 master Picaxe to talk to all remote picaxes?
C. What effect would Radio Controlled Trucks, on 2.4gh, have on the Xbee signal?
Thanks.
TOF