hi,
am trying to add five touch bottons,to a project using a picaxe 28X2 (b.3)and am not having much joy
this is the test code it work on a 14m2 although i change the code to work b.5,b.4 and the sensors work fine.
what am i missing
i,ve tested the pins with an adc 10k pot they are fine.
the 28x2 is powered by 3.3v reg where as the 14m2 was powered by 3AA
rob
am trying to add five touch bottons,to a project using a picaxe 28X2 (b.3)and am not having much joy
Code:
#picaxe 28x2
main:do
touch16 a.0,w0 ; read value into w0
touch16 a.1,w1
pause 20
debug
loop
what am i missing
i,ve tested the pins with an adc 10k pot they are fine.
the 28x2 is powered by 3.3v reg where as the 14m2 was powered by 3AA
rob