Hello,
I'm using one of these Thermal valve actuator's in my project:
http://www.sauterautomation.co.uk/sal/en/products/electric_drives__control_valves__butterfly_valves/unit_valves_and_drives/therm__drive_f__unit_valves__w__stroke_ind_.html (I'm using the AXT111F202 which is 24V.)
At the moment I've got a circuit built that will fully open and close the valve using a mosfet, but I'm not sure how to program it so that the valve stays only partially open.
Please explain to me the best way to be able to control how much this valve opens.
Thankyou
Edit: I probably should have mentioned that I'm using an 18X, and the valve is connected to output 3.
Edit 2: What's up with the "Join date: Jan 1970" on the forum?
I'm using one of these Thermal valve actuator's in my project:
http://www.sauterautomation.co.uk/sal/en/products/electric_drives__control_valves__butterfly_valves/unit_valves_and_drives/therm__drive_f__unit_valves__w__stroke_ind_.html (I'm using the AXT111F202 which is 24V.)
At the moment I've got a circuit built that will fully open and close the valve using a mosfet, but I'm not sure how to program it so that the valve stays only partially open.
Please explain to me the best way to be able to control how much this valve opens.
Thankyou
Edit: I probably should have mentioned that I'm using an 18X, and the valve is connected to output 3.
Edit 2: What's up with the "Join date: Jan 1970" on the forum?
Last edited: