Hello all,
i've been trying to setup a simple output from a 28x1 picaxe to give me 35 pulses and then skip one pulse and repeat (for varying pulse length from 33mS to 450uS) this timing is not suitable for the HPWM but neither is is suitable for pulse-out,wait as the measured time between commands i've found is 0.5mS to step a command and 1.25mS to do a 'repeat' or 'goto'.
I know that i ca up the clock frequency to 16Mhz but this still gives me a theoretical limit for time between commands and 'goto' of 125uS and 312.5uS. is there a methodology for a wider range of PWM frequencies, and a way of missing selected pulses from this output?
cheers for any comments
David
i've been trying to setup a simple output from a 28x1 picaxe to give me 35 pulses and then skip one pulse and repeat (for varying pulse length from 33mS to 450uS) this timing is not suitable for the HPWM but neither is is suitable for pulse-out,wait as the measured time between commands i've found is 0.5mS to step a command and 1.25mS to do a 'repeat' or 'goto'.
I know that i ca up the clock frequency to 16Mhz but this still gives me a theoretical limit for time between commands and 'goto' of 125uS and 312.5uS. is there a methodology for a wider range of PWM frequencies, and a way of missing selected pulses from this output?
cheers for any comments
David