Hi all,
I have some very simple code running on an 08M:
moveservo:
wait 1
'high 2
wait 1
servo 0,200
wait 1
servo 1,100
wait 1
goto moveservo
If I run the code as-is, the servo pulses are continuous, and the servos are held in position. If I "un comment" the third line "high 2" the servos don't work...... Scratching my head as to why this is the case.....Since the servos are connected to pin 0 and pin 1.... nothing to do with pin2.....
I have some very simple code running on an 08M:
moveservo:
wait 1
'high 2
wait 1
servo 0,200
wait 1
servo 1,100
wait 1
goto moveservo
If I run the code as-is, the servo pulses are continuous, and the servos are held in position. If I "un comment" the third line "high 2" the servos don't work...... Scratching my head as to why this is the case.....Since the servos are connected to pin 0 and pin 1.... nothing to do with pin2.....