Andres Rodriguez
New Member
The attached schematic shows a two pin connector (named SOL). When the circuit is powered, Pin1 of the 8M will go high and the output will be +5V on pin1 and Ground on Pin2 of the connector.
After a period of 1, 2, or 3min. I need to reverse the polarity on the pins of the terminal (SOL).
If necessary I could use a larger Picaxe
Any help will be appreciated
Andres
After a period of 1, 2, or 3min. I need to reverse the polarity on the pins of the terminal (SOL).
If necessary I could use a larger Picaxe
Any help will be appreciated
Andres