Hi Folks.
I am working on a small project using the DORJI DRA886 modules.
I have the transmitter hooked up to a 28X2 with the simple code
With a scope I can see the square wave output.
So it's very simple. I have a TTL RS-232 hooked up to the DORJI DA886 receiver and inturn via Teraterm
With a scope I can see as square wave output
With Teraterm I am using 2400 baud and various different settings and all I am getting is garbage.
Can anyone offer some advice.
Many thanks
Dave
I am working on a small project using the DORJI DRA886 modules.
I have the transmitter hooked up to a 28X2 with the simple code
Code:
main:
serout c.3, T2400_4, ("NNNNNN")
pause 500
goto main
So it's very simple. I have a TTL RS-232 hooked up to the DORJI DA886 receiver and inturn via Teraterm
With a scope I can see as square wave output
With Teraterm I am using 2400 baud and various different settings and all I am getting is garbage.
Can anyone offer some advice.
Many thanks
Dave