I am using the serial output command which is specified to work with 232 interfacing. I am attempting to use an sv652 transmitter module in order to send the signal
Transmitter: http://nicerf.com/product_148_58.html
For some reason when I send serial data into the rx pin of the module it does nothing. I am assuming I am mistaken somewhere. I have the same baud rate set in my program as well as on the module. I have attached the screenshot of all settings the module can be set to, I was hoping these modules would be like the plug and play ASK transmitters but I could use some guidance after all!
Thank you!
Transmitter: http://nicerf.com/product_148_58.html
For some reason when I send serial data into the rx pin of the module it does nothing. I am assuming I am mistaken somewhere. I have the same baud rate set in my program as well as on the module. I have attached the screenshot of all settings the module can be set to, I was hoping these modules would be like the plug and play ASK transmitters but I could use some guidance after all!
Thank you!
Attachments
-
131.1 KB Views: 14