I am trying to use a Picaxe 08M chip with a Peter Anderson LCD#117 – 2400 Baud LCD driver (http://www.phanderson.com/lcd106/lcd107.html). It is a very simple hookup with Serial out (Pin 0) connected to the serial input of the LCD#117 unit. The program is as follows:
Symbol i=B0
Pause 1000
High 0
For I =1 to 5
Pause 10
SEROUT 0, T2400, (“?f”) ‘ clear screen
Pause 10
SEROUT 0, T2400, (“Hello”) ‘Display hello
Next i
Unfortunately, my LCD output looks like this
Hell
ello
Hello
Helo
Ello
Does anyone have experience with this LCD driver and have any suggestion what is wrong.
Thanks
John
Symbol i=B0
Pause 1000
High 0
For I =1 to 5
Pause 10
SEROUT 0, T2400, (“?f”) ‘ clear screen
Pause 10
SEROUT 0, T2400, (“Hello”) ‘Display hello
Next i
Unfortunately, my LCD output looks like this
Hell
ello
Hello
Helo
Ello
Does anyone have experience with this LCD driver and have any suggestion what is wrong.
Thanks
John