I have bought the serial lcd & clock ( axe033) and have no problems using this with the 8m chip. However when I try to generate output from an ordinary pic the control commands don't work properly,I am unable to position the character where I want it and the default after clearing the display with 254,1 is the start of the second line. I also can't output whole words, instead of "hello" I need to code each character separate "h" with a pause of 2 sec then "e" pause 2 seconds etc ( actually I have to put in the whole code : serout 3, N2400, ("h") etc)
Also when I want to display a variable generated from an 8 bit a/d chip I am unable to display numbers above 9, I get different characters displayed after this ( some part of the standard character pattern).
I used to be able to output everything fine with my previous lcd ( bought from Cornhill), unfortunately I ruined that one.
Any ideas ?
Thanks Hans
Also when I want to display a variable generated from an 8 bit a/d chip I am unable to display numbers above 9, I get different characters displayed after this ( some part of the standard character pattern).
I used to be able to output everything fine with my previous lcd ( bought from Cornhill), unfortunately I ruined that one.
Any ideas ?
Thanks Hans