I am asking for some ideas/suggestions on what hardware or processes I should/could use on a new project.
This project will consist of eight individual "stations" that, when a button is pushed, will play a recording locally, the other 7 stations and at a remote receiver.
Each station needs to contain 3 (three) switches, a speaker with amp to play a recording, a receiver to play the recording from another station and a transmitter to send the recording to the other stations and the remote receiver.
Station 1 Example:
when switch #1 is pressed a short recording will play ("Station #1 process starting") at itself, all other stations and the remote receiver
when switch #2 is pressed a short recording will play (" Emergency condition at Station #1") at itself, all stations and the remote receiver
When switch #3 is pressed a short recording will play ("Station #1 process ended") at itself, all stations and the remote receiver
I would also need to log the number of pushes of each button from each station at the remote receiver location and show the count of each via an OLED.
Its difficult to try and explain this as,, I ,,, know what I want to do,, but putting it into words is tuff!
So if I need to do further explaining please ask and i will do my best to clarify.
This project will consist of eight individual "stations" that, when a button is pushed, will play a recording locally, the other 7 stations and at a remote receiver.
Each station needs to contain 3 (three) switches, a speaker with amp to play a recording, a receiver to play the recording from another station and a transmitter to send the recording to the other stations and the remote receiver.
Station 1 Example:
when switch #1 is pressed a short recording will play ("Station #1 process starting") at itself, all other stations and the remote receiver
when switch #2 is pressed a short recording will play (" Emergency condition at Station #1") at itself, all stations and the remote receiver
When switch #3 is pressed a short recording will play ("Station #1 process ended") at itself, all stations and the remote receiver
I would also need to log the number of pushes of each button from each station at the remote receiver location and show the count of each via an OLED.
Its difficult to try and explain this as,, I ,,, know what I want to do,, but putting it into words is tuff!
So if I need to do further explaining please ask and i will do my best to clarify.