Logic Rules
New Member
Hi Guys,
I’m having a problem with my 08M disconnected from the download cable.
I’m attempting to run the bike indicator program at http://www.nexusresearchgroup.com/technical_data/bike_indicator.bas
As long as the download cable is connected all is well but when disconnected the LEDS begin to flash, and the Piezo sounds off.
It seems as if there is some sort of sensitivity issue here: if I remove the leads to the inputs all becomes quiet again. If I get too close (1/2” – 1”) to the terminals the device will fire up.
I have tried the same circuit on my 18X, and the results are the same.
I don’t have any shielded wire to try; if in fact that would help.
I am using P. Andersons’ kit boards.
Anybody know how to fix this?
I’m having a problem with my 08M disconnected from the download cable.
I’m attempting to run the bike indicator program at http://www.nexusresearchgroup.com/technical_data/bike_indicator.bas
As long as the download cable is connected all is well but when disconnected the LEDS begin to flash, and the Piezo sounds off.
It seems as if there is some sort of sensitivity issue here: if I remove the leads to the inputs all becomes quiet again. If I get too close (1/2” – 1”) to the terminals the device will fire up.
I have tried the same circuit on my 18X, and the results are the same.
I don’t have any shielded wire to try; if in fact that would help.
I am using P. Andersons’ kit boards.
Anybody know how to fix this?
Last edited: