I am working on a project that has a motor mounted onto a set of 2 servo motors, the servo motors pick a direction for the motor and then the motor needs to go forward for (X) and then reverse for (X) anound of time.
Because the servo driver motor board only has 3 sets of outputs (and 2 are taken up by the 2 servo's) I wanted to take the 3rd output out to the (normal) motor driver board and hook up the motor to this.
Im not sure if it will work and i'm not sure of the coding that it will need but the idea is that the motor driver board 08 will sense the signal (high or low) given by the 08m on the servo driver board and if it's high it will go one way and if it's low it will go the other.
I am a PICAXE beginner so don't know much about this sort of thing but it is for a big exhibition in Vienna so need a reliable and relativley easy way to produce it.
Because the servo driver motor board only has 3 sets of outputs (and 2 are taken up by the 2 servo's) I wanted to take the 3rd output out to the (normal) motor driver board and hook up the motor to this.
Im not sure if it will work and i'm not sure of the coding that it will need but the idea is that the motor driver board 08 will sense the signal (high or low) given by the 08m on the servo driver board and if it's high it will go one way and if it's low it will go the other.
I am a PICAXE beginner so don't know much about this sort of thing but it is for a big exhibition in Vienna so need a reliable and relativley easy way to produce it.