StigOfTheDump
Senior Member
Hi
I am trying to interface a 20M2 with ModCom v8.14. I have nothing connected to the 20M2 except the download circuit.
http://www.weedtech.com/software.html
I have programmed the 20M2 with Anobium's sample code from his Youtube tutorial.
http://www.youtube.com/watch?v=nFR6rzWjU4U
I kept getting an error "Com5 could not be accessed or is not responding" when I tried to run the ModCom.
On one occasion whilst starting/stopping/plugging and unplugging things in different orders, the ModCom displayed some data before the above error came. That was when I plugged the AXE027 into my download socket whilst ModCom was already running and the AXE027 already plugged into the laptop. I found that if I didn't plug the AXE027 fully home it worked. I have set up the download interface on my breadboard and the ModCom works until I connect the serial in wire of the AXE027 (wire b of the download diagram on manual 1 page 8) to the junction of the 2 resistors. Then I get the error.
Any ideas, anyone?
Eventually I hope to have ModCom (or similar) running on ERF/URF.
I am trying to interface a 20M2 with ModCom v8.14. I have nothing connected to the 20M2 except the download circuit.
http://www.weedtech.com/software.html
I have programmed the 20M2 with Anobium's sample code from his Youtube tutorial.
http://www.youtube.com/watch?v=nFR6rzWjU4U
Code:
[color=Blue]setfreq m8
symbol [/color][color=Black]counter [/color][color=DarkCyan]= [/color][color=Purple]b0[/color]
[color=Black]counter [/color][color=DarkCyan]= [/color][color=Navy]0[/color]
[color=Black]Main:[/color]
[color=Green]'sertxd (#b0,13,10)[/color]
[color=Blue]sertxd ([/color][color=Red]"ABC"[/color][color=Black],#[/color][color=Purple]b0[/color][color=Black],[/color][color=Navy]13[/color][color=Black],[/color][color=Navy]10[/color][color=Blue])
pause [/color][color=Navy]200[/color]
[color=Blue]inc [/color][color=Black]counter[/color]
[color=Blue]goto [/color][color=Black]Main[/color]
On one occasion whilst starting/stopping/plugging and unplugging things in different orders, the ModCom displayed some data before the above error came. That was when I plugged the AXE027 into my download socket whilst ModCom was already running and the AXE027 already plugged into the laptop. I found that if I didn't plug the AXE027 fully home it worked. I have set up the download interface on my breadboard and the ModCom works until I connect the serial in wire of the AXE027 (wire b of the download diagram on manual 1 page 8) to the junction of the 2 resistors. Then I get the error.
Any ideas, anyone?
Eventually I hope to have ModCom (or similar) running on ERF/URF.