imported_dave_h
Member
Hi, Yesterday my AXE210 starter pack and the GPS001 GPS receiver arrived, great ! i builded a axe 210 board to fit the GPS receiver so it could connect to my computer and all went well for one little detail, the GPS module seems to refuse to receive signals. It see's sattelites (11) and dumps NMEA info to the computer but according to the coordinates i'm living somewhere in Asia .
I used the supplied antenna and had it running for hours in the open air, the status led is blinking with an interval of ~ 4 seconds and the RSSI led stays of.
a dump of the NMEA data received:
$GPRMC,173259.00,V,4907.8000,N,12303.6000,W,,,290106,,,N*54
$GPGGA,173259.00,4907.8000,N,12303.6000,W,0,00,0.0,,M,,M,,*43
$GPGSA,A,1,,,,,,,,,,,,,,,*1E
$GPGSV,3,1,10,05,57,295,,09,54,242,,04,51,083,,02,34,175,*72
$GPGSV,3,2,10,07,32,067,,20,13,057,,14,10,320,,17,03,190,*74
$GPGSV,3,3,10,01,01,350,,30,01,296,*71
anyone had any luck using this module ?
TIA dave !
I used the supplied antenna and had it running for hours in the open air, the status led is blinking with an interval of ~ 4 seconds and the RSSI led stays of.
a dump of the NMEA data received:
$GPRMC,173259.00,V,4907.8000,N,12303.6000,W,,,290106,,,N*54
$GPGGA,173259.00,4907.8000,N,12303.6000,W,0,00,0.0,,M,,M,,*43
$GPGSA,A,1,,,,,,,,,,,,,,,*1E
$GPGSV,3,1,10,05,57,295,,09,54,242,,04,51,083,,02,34,175,*72
$GPGSV,3,2,10,07,32,067,,20,13,057,,14,10,320,,17,03,190,*74
$GPGSV,3,3,10,01,01,350,,30,01,296,*71
anyone had any luck using this module ?
TIA dave !