Hi, I would like to know if the picaxe is capable of 9 bit serial and if so could someone help or advise me on how to achieve this.
I have a G4 panel and keypad and the ability to logic analyse the data should it be required.
this is a link to a site where I have found the information, I have hooked the comms up to a ttl serial port at 1200 baud and I receive all of the data fine but I cannot send anything to the panel as it requires 9 bit data.
Thank you in advance
Rich
I have a G4 panel and keypad and the ability to logic analyse the data should it be required.
this is a link to a site where I have found the information, I have hooked the comms up to a ttl serial port at 1200 baud and I receive all of the data fine but I cannot send anything to the panel as it requires 9 bit data.
alarm keypad messaging explained
I finally finished decoding all the messages between my alarm panel and the keypad. The alarm is an Accenta Mini G4 from Honeywell. The keypads can be found on ebay for less than £30. Cheap enough …
inmachinablog.wordpress.com
Thank you in advance
Rich