A couple of days ago I assembled a custom board containing a PICAXE-14M2. I get the subject error message every time that I attempt to download my PICAXE Basic program to it. I am using an AXE027 PICAXE USB Download cable plugged into a Stereo PICAXE socket installed on the board. I traced the circuitry from the stereo PICAXE socket to the 14M2 and can find no errors. This was done with continuity checks. I even re-seated the socket. I have verified that there is +5V between pins 14 and 1.
I continue to get the same response. COM18 is the correct port.
Does anyone have any idea what the problem might be?
Her is a picture of the board:
I continue to get the same response. COM18 is the correct port.
Does anyone have any idea what the problem might be?
Her is a picture of the board: