Hi,
Im experimenting with the slots on the 28x2 picaxe microcontroller, and after looking at the forum in relation to slots, ive added some code to set slot locations i want the code to be downloaded too, but im getting an error.
If leave the #Slot 0, the programmer spits an error at me, but if i remove the #Slot 0, the programmer fails to download to #slot 0.
I cleared the hardware memory, and now the code wont download to slot 0, and the microcontroller fails to boot at all
I did a search on the subject, but found nothing of relation, and so i download the most recent picaxe programming editor v5.3.1.
I looked at x2 manual, and it has a #slot 0 command, and the program runs correctly if i remove the slot commands all together.
Any suggestion would really be welcome, thank you.
NOS
Im experimenting with the slots on the 28x2 picaxe microcontroller, and after looking at the forum in relation to slots, ive added some code to set slot locations i want the code to be downloaded too, but im getting an error.
Code:
#Picaxe 28x2
#Slot 0
<Intro Code & Varibles>
run 2
#Slot 2
<Main Program Code>
I cleared the hardware memory, and now the code wont download to slot 0, and the microcontroller fails to boot at all
I did a search on the subject, but found nothing of relation, and so i download the most recent picaxe programming editor v5.3.1.
I looked at x2 manual, and it has a #slot 0 command, and the program runs correctly if i remove the slot commands all together.
Any suggestion would really be welcome, thank you.
NOS