fernando_g
Senior Member
Simple question;
I have a Picaxe project which runs on 3.3V, but requires software updates. I originally programmed the Picaxe in a test socket running at 5V.
I've always used the AXE027 cable, which in my understanding will output 5V TTL levels.
Will the Picaxe's serial input be damaged if I attempt to re-flash it?
And before anyone asks, the Picaxe is soldered to the board.
I have a Picaxe project which runs on 3.3V, but requires software updates. I originally programmed the Picaxe in a test socket running at 5V.
I've always used the AXE027 cable, which in my understanding will output 5V TTL levels.
Will the Picaxe's serial input be damaged if I attempt to re-flash it?
And before anyone asks, the Picaxe is soldered to the board.