techElder
Well-known member
I'm trying to figure out how timer3 works.
Is the accuracy of this quote from Picaxe Manual 2 "BASIC COMMANDS", page 204, common knowledge?
Is the accuracy of this quote from Picaxe Manual 2 "BASIC COMMANDS", page 204, common knowledge?
Confusing at best ...The internal timer counts, when enabled, at a rate of (1/resonator speed) / 4. This means, for instance, at 8MHz the internal timer increment occurs every 0.5us. This value can be optionally scaled by the prescale value (set via bits 5:4) , so with a 1: 8 prescale the increment will occur every 4us (8 x 0.5us).
Last edited: