westaust55
Moderator
As an extension adjunct to the thread “hserout on portc 6”,
in reading the mentioned thread and looking further at the PICAXE manual am I correct in my understanding that for the PortA and PortC pins, that in addition to the HSEROUT & HSERIN commands (which is fixed to the portC pins C6 and C7), other commands such as
SHIFTIN, SHIFTOUT, PULSIN, PULSOUT, etc will also not operate on Port A or Port C.
Commands (other than i2c and spi functions, PWM1/2 with dedicated port C pin allocations on the 40X1) that will work with PortA and PortC are:
DIRSC, HIGH PORTC, LOW PORTC, PINSC
Seems I will be up for some re-allocation of the I/O on my partly completed "PICAXE Experimenting Box"
in reading the mentioned thread and looking further at the PICAXE manual am I correct in my understanding that for the PortA and PortC pins, that in addition to the HSEROUT & HSERIN commands (which is fixed to the portC pins C6 and C7), other commands such as
SHIFTIN, SHIFTOUT, PULSIN, PULSOUT, etc will also not operate on Port A or Port C.
Commands (other than i2c and spi functions, PWM1/2 with dedicated port C pin allocations on the 40X1) that will work with PortA and PortC are:
DIRSC, HIGH PORTC, LOW PORTC, PINSC
Seems I will be up for some re-allocation of the I/O on my partly completed "PICAXE Experimenting Box"
Last edited: