Hi Goeytex,
I have added the antennas and changed the receiving pgm as follows:
#Picaxe 08M2
#Terminal 4800
main:
Do
high c.2
pause 1000
low c.2
SerIn C.4, T2400, b0 ;("X"), b0
SerTxd( "Received ", #b0, CR, LF )
Loop
When I load the pgm I get a 2 sec. flash and nothing more. If I remove the power, I get a 2 sec. flash and the terminal writes. Received 0 - evidently the pgm has passed SERIN and executed SERTXD - without pwr?. I can go on doing this. I hav'nt tried SerIn C.4, T2400, b0 without the antennas.
I dont have a clue!
torben
I have added the antennas and changed the receiving pgm as follows:
#Picaxe 08M2
#Terminal 4800
main:
Do
high c.2
pause 1000
low c.2
SerIn C.4, T2400, b0 ;("X"), b0
SerTxd( "Received ", #b0, CR, LF )
Loop
When I load the pgm I get a 2 sec. flash and nothing more. If I remove the power, I get a 2 sec. flash and the terminal writes. Received 0 - evidently the pgm has passed SERIN and executed SERTXD - without pwr?. I can go on doing this. I hav'nt tried SerIn C.4, T2400, b0 without the antennas.
I dont have a clue!
torben