robert.higginson
New Member
Hi,
I am playing with some SRF005 modules and don't seem to be getting anywhere.
I have connected the +5, 0v to the +v and 0v on the input side of the CHI035 board (with 18M2) fitted. I have connected the middle pin of the SRF005 to input 0 (C.0) of the CHI035 board. Hopefully the idea is to use a single pin I/O connection.
I have tried to use the flowchart loop given in the manual ie. Ultra 0,A > Debug > Wait 0.5 (repeated)
The circuit mounted LED on the SRF005 flashes every second but the Debug screen only shows zeros. I have been reading the other entries in the forum and have replaced the Ultra with an Inc. The Debug value does change!
I have tried this on two SRF005 modules and both do the same thing (not surprisingly!). I have looked around and can't see an idiots guide to this problem so thought that there would be someone out there who would know how to solve my problem.
I am playing with some SRF005 modules and don't seem to be getting anywhere.
I have connected the +5, 0v to the +v and 0v on the input side of the CHI035 board (with 18M2) fitted. I have connected the middle pin of the SRF005 to input 0 (C.0) of the CHI035 board. Hopefully the idea is to use a single pin I/O connection.
I have tried to use the flowchart loop given in the manual ie. Ultra 0,A > Debug > Wait 0.5 (repeated)
The circuit mounted LED on the SRF005 flashes every second but the Debug screen only shows zeros. I have been reading the other entries in the forum and have replaced the Ultra with an Inc. The Debug value does change!
I have tried this on two SRF005 modules and both do the same thing (not surprisingly!). I have looked around and can't see an idiots guide to this problem so thought that there would be someone out there who would know how to solve my problem.