Hi,
Yeah, I found that I had that datasheet in my BabbleBot folder ... I never knew that the Soundgin and the BabbleBot were the same chip. I've been using the SpeakJet chips with all my robot projects designed right onto the RoboGuts™ circuit board.
With a project talking about each...
Hi,
I forgot to mention that I have access to thousands of the SpeakJet and Soundgin chips that I can sell for the original price of $25ea. + shipping.
.
Hi,
He shut down speechchips.com thinking everybody moved onto .mp3 players, but he still sells the chips (Soundgin and SpeakJet) and arduino shields for several other chips on eBay.com.
My problem is I am making one of his older RS-232 to chip designs to connect from my vintage Altair 8800...
Hi,
Can you share more info about the Soundgin / BabbleBot chip? Got a schematic for the PIC to Soundgin chip? Want to sell your PIC to Soundgin?
wperko @he brainless dot org-anizm
Hi,
Thanks, I forgot about the "" around the data. It's been awhile since I did any PICAXE programming and I'm just doing some initial tests for a vintage Altair 8800 computer project.
.
Hi,
I am working on a project that I need to send data like this out to a SpeakJet chip:
\0RX\011J 0NX\012J 0NX\013J 0NX\014J 0NX\015J 0NX\00J 88NX\01J 0NX\02J 0NX\03J 0NX\04J 0NX\05J 0NX\06J 0NX\07J 96NX\08J 0NX
Just plugging that line into a Serout command doesn't seem to work ... the...
Hi,
I forgot to add the DIRSB=%11111111 in the init section of the program ... silly me. Now it's working and I think the only thing left is to add an output PIN for a strobe to the Processor Technology 3P+S board.
Hi,
HIPPY's code works perfect, I'm just adding the LET PINSB = b0 into the program so that the chip should turn LEDs ON/OFF as the ASCII code for a visual reference.
Looking at your info, it looks like I forgot to setup the DIRSB
Is this what I need to do in the initializing section of...
Hi,
Finally got back to this project. Connected the Tx PIN OUT to the 20M2 PIN 12 = B.6
Then hserin w1 and a CASE statement for the capital letters, numbers and special characters.
Next time I get into the project I'll have a gosub to send parallel data out the B.0 to B.5 and B.7 for 7-bit...
Hi,
The FDC+ Serial Drive Server app on my PC connects to my Altair 8800 just fine.
What I want to do is connect my Altair-Duino Pro computer to the FDC+ Serial Drive Server app on my PC so my Altair-Duino Pro can a copy of the FDC+ Serial Drive Server app on my PC too.
IF I can get my...
Hi,
I bought the usb-host-board-v24 ... https://www.hobbytronics.co.uk/usb-host-board-v24 and I'm trying to figure out how to see the data from the device in the debug screen using the KBIN command. I can see the key bytes on my oscilloscope, but not on the debug for the 20M2 chip.
What...
Hi,
Actually, on these old vintage 1975 computers, CP/M can only manage 2 HDDs and 2 FDDs. A:, B:, C: and D:
I think it's a moot attempt now ... I forgot that the FDC+ Serial Drive Server talks to the Altair 8800 at 403.2K BAUD ... I guess that must be a disk drive data speed.
Hi,
You are correct. But it's that reading and writing protocol that I want to capture so I can try it from my Altair-Duino Pro computer. I want my Altair-Duino Pro computer to use the FDC+ (on another COM port) just like the Altair 8800 does. That would make life so much nicer with the...