For some time I have been trying to get an LDR CIRCUIT to work independent of the picaxe proto Board but for some unknown reason it is simply not working. Thus far I have built three circuits hoping that what ever oversight may have occured would be corrected. But all to no avail, pin 2 is suppose to be going high but it is remaining low and pin0 is just blinking continually. I hae tried programming the Picaxe 08M2 WITH BOTH Logicator Flow chart and THE Yenka software programming system but the results have been the same. As mentioned Pin 0 continues to blink and Pin 2 which is expected to be going high is remaining low. When the IC is placed on the Proto board it would work as it is suppose to. My conclusion is that Iam overlooking something that is very basic, but I just dont seem able to detect what it is. Iam presently trying to sort out how to upload the flow progrm that Iused. This may take awhile.