Hey guys,
So what i have is a program written in vb.net that works that sends the letters "u", "d", "l" and "r" via serial cable to the 08m chip i am using.
The vb.net program works as ive used it many times before.
I have the code below, it is supposed to turn on pin 1 and 2 when the specific letters are entered... i checked the pins with a digtal multi meter and it reads only 0.22v not the expected 5v... Can someone help?
So what i have is a program written in vb.net that works that sends the letters "u", "d", "l" and "r" via serial cable to the 08m chip i am using.
The vb.net program works as ive used it many times before.
I have the code below, it is supposed to turn on pin 1 and 2 when the specific letters are entered... i checked the pins with a digtal multi meter and it reads only 0.22v not the expected 5v... Can someone help?
Code:
main:
Serin 3, N2400, b0
select b0
case "l"
high 1
pause 500
low 1
case "r"
high 1
pause 500
low 1
case "u"
high 2
pause 500
low 2
case "d"
high 2
pause 500
low 2
endselect
goto main