just got my 14M's today and started playing around. I don't know what I am doing wrong but something must not be right. if i write something small to turn an output high or low with pauses in a loop it works fine. but i try something like what is below to turn all the outputs high when input 0 is high I get nothing. I even put the debug in there and when i push the button b0 = 1 shows in the debug screen and she b0 = 0 when i let off. this should mean my button is working but the outputs never go high. I tried with two different 14M's with the same result.
I am using 3 AAA batteries to power my board and i have the button inbetween +V and pin0 and 10k resistor between 0V and pin0.
main2:
b0 = pins
debug b0
if pin0 = 1 then
high 0
high 1
high 2
high 3
high 4
high 5
else
low 0
low 1
low 2
low 3
low 4
low 5
end if
goto main2
Edited by - orko007 on 16/08/2007 18:27:29
I am using 3 AAA batteries to power my board and i have the button inbetween +V and pin0 and 10k resistor between 0V and pin0.
main2:
b0 = pins
debug b0
if pin0 = 1 then
high 0
high 1
high 2
high 3
high 4
high 5
else
low 0
low 1
low 2
low 3
low 4
low 5
end if
goto main2
Edited by - orko007 on 16/08/2007 18:27:29