Hemi345
Senior Member
I saw Buzby's thread on getting slot 4 working with his 20X2 and am looking into this for my Humidistat V2 project. I was reading through the documentation on the "run" command and it mentions the following:
2) Is the Microchip 24LC512 compatible with this feature? It's arranged as 64K x 8 (512 Kbit) where as the 24LC128 is arranged as 16K x 8 (128 Kbit).
2a) If the 24LC512 is compatible, is the remaining ~384K available to use for storage when running from internal/slot 0?
Thanks.
1) If the program is running from internal/default slot 0 of my 20X2, the i2c commands should work to access the other i2c devices on the bus (OLED, RTC, etc), correct?Running a program from external i2c has some restrictions
1) The i2c bus is reserved exclusively for the program reading.
2) The i2c pins cannot be used for any other purpose.
3) Any hardware i2c/spi commands are completely ignored.
2) Is the Microchip 24LC512 compatible with this feature? It's arranged as 64K x 8 (512 Kbit) where as the 24LC128 is arranged as 16K x 8 (128 Kbit).
2a) If the 24LC512 is compatible, is the remaining ~384K available to use for storage when running from internal/slot 0?
Thanks.