I was originally going to reply to this thread, but think a new thread is more suitable.
Can someone explain exactly which chips the 'table' commands work with?
Programming Editor (5.5.0) 'Quick Syntax checker' states:
Command Chips applies to
table 20X2, 28X2,40X2, 28x1, 40X1
tablecopy 14M2, 20M2
readtable 14M2, 20M2, 20X2, 28X2, 40X2, 28X1, 40X1
Online manual 2 states:
Command Chips applies to
table 14M2, 18M2, 20M2, 20X2, 28X2, 40X2, 28X1, 40X1
tablecopy 14M2, 18M2, 20M2
readtable 14M2, 18M2, 20M2, 20X2, 28X2, 40X2, 28X1, 40X1
The 18M2+ is not specifically listed, but the online command reference states it works with all three commands.
Can someone explain exactly which chips the 'table' commands work with?
Programming Editor (5.5.0) 'Quick Syntax checker' states:
Command Chips applies to
table 20X2, 28X2,40X2, 28x1, 40X1
tablecopy 14M2, 20M2
readtable 14M2, 20M2, 20X2, 28X2, 40X2, 28X1, 40X1
Online manual 2 states:
Command Chips applies to
table 14M2, 18M2, 20M2, 20X2, 28X2, 40X2, 28X1, 40X1
tablecopy 14M2, 18M2, 20M2
readtable 14M2, 18M2, 20M2, 20X2, 28X2, 40X2, 28X1, 40X1
The 18M2+ is not specifically listed, but the online command reference states it works with all three commands.