flyingnunrt
Senior Member
Sooo how can I minimise this glitch at reset?--------------------------------------------------------------------------------
Haxby - the pins do not go 'output high' but to 'input'. On power reset all PIC microcontrollers (PICAXE or not) have all pins configured as high impedance inputs, and it takes a fraction of time for the output pins to be changed from inputs to outputs and asserted low at the start of a program.
Therefore the electronic cicruit should be able to handle the momentary case when the output devices are not directly driven upon reset.
__________________
PICAXE Technical Support
18X using 4 NMH cells
non saftey critical, but the spike is upsetting a downstream device.
should the output be put through a darligton?