cravenhaven
Senior Member
I have tried a couple of options to get this working properly but still have issues.
First attempt worked in simulator but skipped several inputs on the chip. eg I typed in the value 11 and the next few lines would execute down to Hours. I assumed this meant it was a keybounce response (somehow receiving multiple ENTERs).
Code
SERTXD(CR,LF,"Type in current year eg 11")
SERRXD[20000],Year
SERTXD(CR,LF,"Type in current month number eg 08 for August")
SERRXD[20000],Month
SERTXD(CR,LF,"Type in current Day of Month eg 25")
SERRXD[20000],Day
SERTXD(CR,LF,"Type in current Hour eg 17 for 5pm")
SERRXD[20000],Hours
SERTXD(CR,LF,"Type in current Minutes eg 57")
SERRXD[20000],Mins
SERTXD(CR,LF,"Type in current Seconds eg 43")
SERRXD[20000],Secs
So I modified it to use a qualifier, but now I have to put in the values twice for each entry. ie y11<ENTER> y11<ENTER>. If I type the value once and wait for the timeout it doesnt accept the value.
Code
SERTXD(CR,LF,"Type in current year eg y11")
SERRXD[20000],("y"),#Year
.
.
Thanks
Allan
First attempt worked in simulator but skipped several inputs on the chip. eg I typed in the value 11 and the next few lines would execute down to Hours. I assumed this meant it was a keybounce response (somehow receiving multiple ENTERs).
Code
SERTXD(CR,LF,"Type in current year eg 11")
SERRXD[20000],Year
SERTXD(CR,LF,"Type in current month number eg 08 for August")
SERRXD[20000],Month
SERTXD(CR,LF,"Type in current Day of Month eg 25")
SERRXD[20000],Day
SERTXD(CR,LF,"Type in current Hour eg 17 for 5pm")
SERRXD[20000],Hours
SERTXD(CR,LF,"Type in current Minutes eg 57")
SERRXD[20000],Mins
SERTXD(CR,LF,"Type in current Seconds eg 43")
SERRXD[20000],Secs
So I modified it to use a qualifier, but now I have to put in the values twice for each entry. ie y11<ENTER> y11<ENTER>. If I type the value once and wait for the timeout it doesnt accept the value.
Code
SERTXD(CR,LF,"Type in current year eg y11")
SERRXD[20000],("y"),#Year
.
.
Thanks
Allan