Hello,
i am currently trying to make a proram for my project board, i have two problems.
The first is that my program will not download to my Picaxe 18x through my board, though it will download to the same chip on a picaxe project board that i purchased, this is a big program as i need to be programming a real time clock directly from a picaxe. I have checked all my circuit and it seems to meet the diagram provided by Picaxe.
The second is the realays on my board, i have three solid state relays, they are connected as follows, the relays + terminal is connected to +5v on the board, the - terminal is connect to a picaxe output. i have run the following program to the board and i have various different results.
Let pins = 0
main:
high 5
pause 1000
low 5
pause 1000
goto main
When this is programmed in, all three of my relays are turned on, then when i press the reset button on my board it turns them all of for a split second then two go back on and the one connected to pin 5 stays off for 1 second and then stays on forever.
can anyone please help me???
thanks
i am currently trying to make a proram for my project board, i have two problems.
The first is that my program will not download to my Picaxe 18x through my board, though it will download to the same chip on a picaxe project board that i purchased, this is a big program as i need to be programming a real time clock directly from a picaxe. I have checked all my circuit and it seems to meet the diagram provided by Picaxe.
The second is the realays on my board, i have three solid state relays, they are connected as follows, the relays + terminal is connected to +5v on the board, the - terminal is connect to a picaxe output. i have run the following program to the board and i have various different results.
Let pins = 0
main:
high 5
pause 1000
low 5
pause 1000
goto main
When this is programmed in, all three of my relays are turned on, then when i press the reset button on my board it turns them all of for a split second then two go back on and the one connected to pin 5 stays off for 1 second and then stays on forever.
can anyone please help me???
thanks