PICAXE 28X - Using "symbol" with pinsc as outputs.

Williamson

New Member
With firmware version 7.4 on the 28X. Once dirsc = %11111111 has been set, can the "symbol" function (symbol [name] = ?)be used to rename the outputs for use with the "high" instruction (e.g. high (symbol). and if so how?.
 

BeanieBots

Moderator
You can only use symbol to specify the pin.
You cannot use it to specify the port.
See:-
http://www.rev-ed.co.uk/picaxe/forum/Topic.asp?topic_id=2707
 
Top