Looking for a good controller to run multiple LEDS AND automotive lamps.
http://www.ebay.com/itm/400493404904?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Looking at a 4511, just cus I have it handy at this moment.
The 2003 would be pretty weak for this correct?
I would like to have a pin always on if key is on.
assortment of channels to control leds on/off or a sweep through them would be cool.
As far as the automotive lamps, I am not sure what the current draw is common on these.
14m2 Picaxe
12v supply w a 7805 for 5v supply.
5v supply circuit design off the picaxe manual
If my math is correct 12v-24W-300leds. Gives me a 6mA draw per led. Is this correct?
Hope someone has a better idea as far as a driver for this
Thanks again!
http://www.ebay.com/itm/400493404904?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Looking at a 4511, just cus I have it handy at this moment.
The 2003 would be pretty weak for this correct?
I would like to have a pin always on if key is on.
assortment of channels to control leds on/off or a sweep through them would be cool.
As far as the automotive lamps, I am not sure what the current draw is common on these.
14m2 Picaxe
12v supply w a 7805 for 5v supply.
5v supply circuit design off the picaxe manual
If my math is correct 12v-24W-300leds. Gives me a 6mA draw per led. Is this correct?
Hope someone has a better idea as far as a driver for this
Thanks again!
Last edited: