To,HIPPY and others forum members
RE CMPS14 Compass Problem
I have found the fault that was causing No Response to Acquisition Code
I had removed the Terminal Pin Assembly so that I could fit it into
my PCB and Case.
I had inspected the connections when I removed the Terminals,
but under a HIGH powered magnifier, I have found that there was an
Open Circuit track [Very Small] in the vicinity of the RX Pin.
Obviously I had damaged the connection, and I repaired this, and once again
the Compass is NOW Responding with the terminal, and gives very good data.
I am not young any more and with relations having problems with bush fires in their
vicinity, I have problems.??
I apologise to forum members that have tried to help me. and have taken Hippies advice.
""If things work they should keep on working !!!!!
Thanks
John
RE CMPS14 Compass Problem
I have found the fault that was causing No Response to Acquisition Code
I had removed the Terminal Pin Assembly so that I could fit it into
my PCB and Case.
I had inspected the connections when I removed the Terminals,
but under a HIGH powered magnifier, I have found that there was an
Open Circuit track [Very Small] in the vicinity of the RX Pin.
Obviously I had damaged the connection, and I repaired this, and once again
the Compass is NOW Responding with the terminal, and gives very good data.
I am not young any more and with relations having problems with bush fires in their
vicinity, I have problems.??
I apologise to forum members that have tried to help me. and have taken Hippies advice.
""If things work they should keep on working !!!!!
Thanks
John