Good mornig and for all of you a happy new year !!
I hope one or all of the members can help with my little problem. I'm rebuilding a dasboard for a VW T3 on the RPM side. The RPM-clock was no problem but there are two signals that i want to check and those are fuel en coolwatertemp.
By lack of space in the clockbox i will use a 08M2 and the I2C connection for the display. No problem so far. Then it becomes tricky because i see only one ADC input en one DAC output.
My question: how do i realise to use the one ADC for two signals or can change the DAC to an ADC-input.
All suggestions are welcome.
Have a nice day !!,
Hans
I hope one or all of the members can help with my little problem. I'm rebuilding a dasboard for a VW T3 on the RPM side. The RPM-clock was no problem but there are two signals that i want to check and those are fuel en coolwatertemp.
By lack of space in the clockbox i will use a 08M2 and the I2C connection for the display. No problem so far. Then it becomes tricky because i see only one ADC input en one DAC output.
My question: how do i realise to use the one ADC for two signals or can change the DAC to an ADC-input.
All suggestions are welcome.
Have a nice day !!,
Hans