Search results

I put in 3 new batteries and now it works .I guess 2.8 V is not enough to operate it. I've got to watch and see how far down the 4.5 V go's down before it quits. Thanks for all your input …...

Here is a photo of the bread board. The top side is the logic side 2.6 V now, bottom is motor side 5.6 V now. These just show what I mean by two sides .some of the wires now are powered from top side.[Logics ]

It's the whole left side of the B B Should be 4.5 V ,The right side Motor side is 5.5 should be 6 V

I only have 2.8 volts on logic side could that be the problem

I tested the voltage and on the logics side I only have 2.8 volts that might be the problem

Yes I saw Flashes Does that mean its working

Well now it don't work again .I took it out to show my grandson and brother how good it was working. but It didn't work. I redownloaded the program and reput code in remote but nothing helped, the batteries test good . Anyone else ever have a problem like this ? Is there a special way to decode...

Ok I'll Try the Video To Big

Well thanks to all of you guys It is working now , Batterys are a little low but it all works as it should. Hemi the 10k and 22k were already in there. you probably couldn't see them in My photos. The capacitor is there also ..By changing them 3 wires You and Phill said, and fixing My motor...

I also found out one of My Motores was not working ,BROKEN WIRE so that my have been part of issue. I changed the wire s you suggested but didn't try it yet. I'm thinking I should change the Cap and Res as also suggested by another helper .[HEMI345].. I don't want to blow it all up so I don't...

I also tried your rewrite of the program and the buttons are right when checked in the terminal but the tank don't move.

Phil as you can tell by now I don't have a clue as to how this works but if I move them wires over will the motors still be operating on the higher voltage ?.I'm going to add some photos of my B B so you can see what I have wrong.

l TRIED YOUR PROGRAM AND F R L S KEEPS COMING UP BUT mY METER IS a PIECE OF S--- AND DONT WORK HALF THE TIME , AT ONE POINT THE LEFT TRACK WoULD RUN WHEN I PUSHED THE RIGHT + BUTTON ON THE REMOTE CIRCLE and stop when I pushed the center button. I did this about 5 times and when I pushed stop...

Ok everyone My problem now is the buttons are all right as far as what I want them to do but when I push them nothing happens .I checked to see if power was right and it appears to be great. There must be something wrong with B B wireing or could it be in the resisters or capaseters? I'm going...

Well I really am stupid because I wasn't pressing the remote. Now here is what I get when pressing remote Lines 1-3 infer input 18 lines 4-7 ' " 19 lines 8-12 "...

I got the window open but there is only a number 1 showing in the window ..whats next .The bottons on the left red, top and bottom the rest are green .Thanks for all your help so far .I wish I was more advanced on these issues. Correct com port and 4800 B Rate. I did notice when I was in one of...

Well, now I got it to download where do I see the Results .

I guess I don't know how .What ever I try Don't work.

I'm going to try .I ordered the parts, should be here Monday ..Thanks and I will let you know if it works ….

About the cable I mean. I bought it from picaxe direct...My chip is a 20M2 /This is My first try with picaxe so I would definitely need help .