Search results

Thank you technical support - works perfectly using basic code - (which I was avoiding) - .

thanks but need to do urgently to add to project - will try phoning PICAXE - hopefully somebody at the end of the line. :)

Good evening I am trying to write simple code to move servo motor to 45' 90' 180 using the flow chart. can I do this using the servo command only or do I need to use variable as well - and if so why. I have to say I have found the manual totally confusing. Thanks

Connected a second power supply to motor and now works :)

Hi No - LEDS was connected to the output of the Darlington pair chip. (it is part of the PICAXE 014 project board). When I removed LED and replaced with motor I could not download. When I put LED back on it started downloading again.

Yes - the LEDs work fine and it finds COM port. But when I add motor it says COM PORt not found

Good morning I have the PICAXE-14M Starter Pack (AXE004U) but when I tried to add a motor it gave error message when I tried to download. It works fine with LEDs. Any clues Thanks

Just to say it is the SRVO motor normally used with the Arduino

Good afternoon We are trying to connect a servo motor to a PICAXE 014M2 board. Any suggestion Thanks

Thank you We had a bit of a space saving issue. This was very helpful

Good morning I am using 2 separate power supplies. Can I join both LCD and PICAXE board to one supply. Thank you

Thank you everyone .Yes indeed the problem was I was using 2 power supplies 1 for PICAXE and one for LCD display but as you pointed out I had not linked the 0V of LCD to PICAXE. All working well now Thanks again

Thank you - Yes I am using the pin outs directly from 14M2 - also check my power supply just 4.15V. Now do I try getting into school to pick up batteries lying on my desk and risk setting off all the alarms :)

Good morning I am really struggling with LCD display. I have linked the H3 to AXE117 to the PICAXE B3 ouput pin and unable to get display. It is downloading. When I started I had the factory settings on display but now nothing. Got seperate voltage supply (4.5V ) to AXE117 and to LCD display...