Search results

  1. The bear

    Garden Irrigator

    Hi BESQUEUT, Good to hear from you. Just a small update, Pulsout works fine. Regarding code / code, most people don't seem to have trouble with it. On the whole, the forum/ PE6 works brilliantly.
  2. The bear

    Garden Irrigator

    Instead of 'Toggle', I'm going to try 'Pulsout C.1, 5' (mS).
  3. The bear

    Garden Irrigator

    @ hippy, Thank you. I've been playing in the Sandbox that long, the tide came in and flattened my sand castle.
  4. The bear

    Garden Irrigator

    @ Ibenson, As I see it; In the "Timed switch position" , with the Fet Off, +12v will be present. So pinC.3 = 1 which = No toggle. I only want the Led flashing when the valve is grounded and therefore on. (Hope I've got that right). Thanks for your interest and help. I could be on the verge of a...
  5. The bear

    Bear Code test #25

    ;IRRIGATION using Buzby timer v1.0a 12.06.19 #picaxe 08m2 ;274 Bytes Toggle C.1 = 12v present #No_data ;1 HR delay, ON for 1 Hr, OFF for 2 Hrs, ON for 1 HR #Com 3 ;Resets after 24 Hrs Sertxd("IRRIGATION using Buzby timer v1.0a 12.06.19",13,10) Symbol minutes = w2 Symbol...
  6. The bear

    Bear code test

    Thanks Buzby & Ibenson. Working on it. Not there yet!
  7. The bear

    Garden Irrigator

    Corrected circuit. pinC.3 feed. Apologies for any confusion. bear..
  8. The bear

    Bear code test

    Indent failed again. ;IRRIGATION using Buzby timer v1.0a 12.06.19 #picaxe 08m2 ;274 Bytes Toggle C.1 = 12v present #No_data ;1 HR delay, ON for 1 Hr, OFF for 2 Hrs, ON for 1 HR #Com 3 ;Resets after 24 Hrs Sertxd("IRRIGATION using Buzby timer v1.0a 12.06.19",13,10)...
  9. The bear

    Garden Irrigator

    @ Ibenson, I had trouble loading my code. Original is indented. Kept getting all the colour info. I selected all, then clicked 'for forum' then pasted into code/ code. Will try harder. My problem, When the power is removed from the water valve, sometimes the toggled Led is off, equally...
  10. The bear

    Garden Irrigator

    Hello, Suggestions please. Problem, using 'Toggle'. Toggle flashes a Led, to indicate water flow. When power (12v) is removed, Led has a 50 50 chance of being OFF, I would like 100% ;IRRIGATION using Buzby timer v1.0a 12.06.19 (Thank you Buzby, Desperate Dans cat). #picaxe 08m2 ;274 Bytes...
  11. The bear

    relance automatique suite à défaut

    Bonjour, Non francais. En ce qui concerne l'alimentation secteur (220 V ca), il y a normalement un condensateur (secteur assigné) dans l'alimentation. https://electronnicproject.blogspot.com/2017/09/230v-led-driver-circuit.html via Google translate. Cordialement, ours ..
  12. The bear

    Development Board AXE091 full Schematic

    Hi Ted, Welcome to the forum. bear..
  13. The bear

    Brain hurts..anyone bored..

    @ depeet, Thank you for the enlightenment, re: FET circuit, and your model too.
  14. The bear

    Brain hurts..anyone bored..

    I don't understand the function of the FET, could you enlighten me please. Probably obvious, but not me.
  15. The bear

    Software for the MS5637-02BA03 Barometric Pressure Sensor

    Suggest you post this in the 'Active PICAXE Forum'. Good luck, bear..
  16. The bear

    Need help identifying two 20 pin Picaxes

    From Google: Migrating from 18F14K50 to 18F14K22 | Microchip https://www.microchip.com/forums/m488973.aspx Cached 29 Mar 2010 - 9 posts - ‎6 authors Had the same problem, and found the answer in a similar post on ... If you like Basic then the Rev-Ed PICAXE 20X2 is based on the 18F14K22 ..
  17. The bear

    Inteface PIR to 18M2 on 18m project board.

    Hi Dan, Thanks for the link to your sensor. Good luck..
  18. The bear

    Inteface PIR to 18M2 on 18m project board.

    Hi Dan, Please supply link to your sensor.
  19. The bear

    Picaxe touch sensor for ham CW keyer?

    @szd51pilot , Nice glider.
  20. The bear

    1Hz oscilator

    @hippy , re: Post 29. Thank you for taking the time and patience to explain the workings. I have a 'scope and looking forward to some learning.
Top