Search results

  1. Bill.b

    Are Rev-Ed & Picaxe missing out??

    I am still using my 21year old compaq E500 laptop for picaxe programming running win 2000 with 30meg HD. I can only run picaxe 5.** programming software on this machine. Bill
  2. Bill.b

    Programming tutorials/websites to learn how to use the BASIC programming codes

    HI Gaetamo The is a Book by David Linciln "programming and customizing the Picaxe microcontroller" Here Bill
  3. Bill.b

    H-Bridge for 12V

    I use the LM298N for most of my robot and other motor applications . With 36v and 2Amp capacity and the the ability to use PWM control of the motors. Also an internal 5V supply is very handy. Bill
  4. Bill.b

    Graphical display from serial port data

    This was a project I looked into back in 2012 I used PLX-DAQ serial to excel freeby to generate real time graphs. this application was for a radar scanner using a SFR005 ultrasonic unit. hope this may help picaxe 18m2 servo connected to b.0 (pin 6) SFR005 output connected to b.3 (pin 9)...
  5. Bill.b

    Towers of Hanoi Revisited

    The bigtreetech e3 V2 works great in my ender 3 It has the same footprint as the creality board with the addition of sockets for a BLTouch bed leveler and the bigtreetech smart filament sensor. This is the code for slot 2 of the 40x2 which includes the follow me routine. Bill
  6. Bill.b

    Towers of Hanoi Revisited

    This is the schematic of the car Bill
  7. Bill.b

    Towers of Hanoi Revisited

    Hi Rick I am using BigtreeTech Skr mini E3 V2 board in the Ender 3, very quiet, + the TFT35 V3 display. I have the E3 turbo board but had several issues with it and octoprint. I to use Cura V4.8. The car has several modes - 1. free roam 2. bluetooth remote control. 3. light follower. 4. light...
  8. Bill.b

    Towers of Hanoi Revisited

    Hi Rick I used the simple microsoft 3d modeler that comes with win 10. I also use FreeCad sometimes. I have an Ender 3 printer that I have greatly modified over the past 2 years. :- 32bit main board, microswiss direct drive, graphic display, BlTouch and a raspberry pi running Octoprint...
  9. Bill.b

    Towers of Hanoi Revisited

    This is my adaption of Rick100's Tower of Hanoi program from 2011. I have updated the original 08M program to run on a 08M2 also I had to modify the lookup tables for the servo position to suit my arrangement. As all components are 3d printed I can supply the STL files if required. Bill
  10. Bill.b

    Is using Bluetooth a problem?

    Hi micrometal This is code i used to control a robot car from my phone using bluetooth via a HC-06 and roboremo App. B12 is the data block identifier, b13 is a null byte b14,15and 16 are the data bytes in ascii format. In most cases I only required the identifier byte as most functions of the...
  11. Bill.b

    Extended time delay

    This will give you a delay of approximate 60 min at 4mHz, the pause can be changed for other values of mHz For w1 = 1 to 3600 pause 1000 next w1 Bill
  12. Bill.b

    My Old-School Distraction

    This was my first attempt at programming back in the early 80s, I stall have my 6802 D3 Kit Bill
  13. Bill.b

    SK6812RGBW (Smart RGBW LEDs) and Picaxe 14M2

    Hi Mark I have used the WA2812 LEDS for my Christmas lights. The picaxe chips will not address these leds, I Used the PIC32MX*** chips for this project. Got to the backshed forum for infomation on programming these LEDs. Bill
  14. Bill.b

    Picaxe 08 ^ 433MHz Tx Rx

    Hi Stephen This is my current version of my bot with pan and tilt control of the camera. The comms are Blutooth, so the code would not be suitable for you. You can send a private message by selecting the envalope at the top of the page. This is for sending address or email address which you do...
  15. Bill.b

    Picaxe 08 ^ 433MHz Tx Rx

    Hi Stephen This is the code for the TX and TX I used on my robot car. The receiver controls a Relay and a servo to pan the camera. The tx uses a joystick to control the servo and buttons for the relay ON / OFF. The joystick input is a 10k pot. The AXE213 fitted with TX and RX modules are...
  16. Bill.b

    Picaxe 08 ^ 433MHz Tx Rx

    Hi Stephen I have used the picaxe AXE213 encoder modules for reliable communications between picaxe. These encoders take of the preamble and CRC resulting in reliable comms. You only need to send and receive serial data to the AXE213. this is the transmitter for my robot car (not used now...
  17. Bill.b

    Ebike problems

    checkout this picaxe project https://picaxeforum.co.uk/threads/a-picaxe-24vdc-electric-scooter.7722/ Bill
  18. Bill.b

    HoHoHo

    Merry Christmas and a Happy New Year from Australia. All are picaxe powered. Bill
  19. Bill.b

    12v motor switching advice

    Hi Do you require direction and speed control? I have used this module from Banggood to control 3Amp motors up to 30V https://www.banggood.com/LMD18200-Car-DC-Motor-Driver-Module-H-bridge-Electronic-Component-p-1424844.html?rmmds=search&cur_warehouse=CN Bill
  20. Bill.b

    OK how does it work and can a Picaxe do it?

    Hi all. I have constructed the unit described be techElder. here is the 14m2 program I used. One addition I made to the circuit was to add a 1f super capacitor to the circuit. This allowed the operator to remove the battery and the lights and switched still worked up to 15 min with no...
Top