Search results

  1. The bear

    Water detect wire

    @julianE , You could preheat your SS wire, oven or armpit. Good luck...
  2. The bear

    Hippy status, rev 2.0

    Could be a clone?
  3. The bear

    Hippy status, rev 2.0

    "Start simple". One of hippys bywords.
  4. The bear

    PCB Scope missing Position/Level control

    Hi dennis, (Off topic). Model Engineers Workshop. The home of Model Engineer and Model Engineers' Workshop Magazines (model-engineer.co.uk) For your lathe project, Bear..
  5. The bear

    power supply with large capacitance between regulator and 14M2

    https://picaxeforum.co.uk/threads/auto-shutdown-regulator.13079/ Bear..
  6. The bear

    power supply with large capacitance between regulator and 14M2

    Hi wapo54001, There is an auto shutdown circuit somewhere on the Picaxe forum, possibly from "hippy". It might be worth a search. Good luck, Bear..
  7. The bear

    Restarting a Program

    Hi PiX, Welcome to the forum. Your question is way above my pay grade. However, you will be asked to supply all relevant information, regarding your query. Like your program & voltage supply. Good luck, Bear..
  8. The bear

    Set Duty Cycle with PWMDuty

    Thanks Phil, Mine's a Tek 1052B, it does get a mention.
  9. The bear

    Set Duty Cycle with PWMDuty

    @PhilHornby , Nice 'scope.
  10. The bear

    Editor Options Backup

    In Post #7, I said that the backup option had not been used. On checking it today, I have three in the backup folder, only one that is mine, the other two are programs that have been copied and saved by me. Win10. Bear..
  11. The bear

    Problem with pause command

    Your pause 2000 is 2 secs, were you thinking 20000 = 20 secs. Good luck..
  12. The bear

    Editor Options Backup

    @ dgc188, I don't have an answer to the backup problem. It's a good question, with a bit of luck you will get a good answer. I have never tried the backup myself. Regards, Bear..
  13. The bear

    New Design 60 Amp Mppt Charger Controller using Picaxe 28X2

    @premelec, Did you fall out of your pram? @ lbenson, You are plenty smart, not playing with your lead soldiers may have tipped you over the top. @ papaof2, Good luck with your repair. Bear..
  14. The bear

    Picaxe 20X2 60 Amp Mppt Charger Controller

    @ Solar Mike, Looks all very nice. May I ask what system you used to construct the circuit diagram/schematic? Good luck, Bear..
  15. The bear

    Analogue Calibration Board problem.

    Hi everyone, The bear is receiving, thanks to all for your suggestions. Flenser, will try your circuit. AlleyCat, Interesting re; hippys remarks. I have found the BAS810 board very useful, it's not always easy to debug (Remote) established projects. It has been known, for me to construct a...
  16. The bear

    Analogue Calibration Board problem.

    @ neiltechspec, Mine is very similar, everything turns off at 11:00pm via a mains time-switch. It has been working fine for several years, then the LDR started fading away, lights coming on too early. Fitted the new LDR, code " if ADC < 35 then, get them lights on", or words to that effect.
  17. The bear

    Analogue Calibration Board problem.

    Thank for your responses. @ Goeytex, It's kind of you to offer, but I'm just a simple bear. So a simple solution is in order. It's good to see you back on the forum. I wonder how Tex is doing? @Flenser, The setup consists of a dusk sensor to put the outside lights on. The sensor lives outside...
  18. The bear

    Analogue Calibration Board problem.

    Hello Everyone, Help required with my "Analogue Calibration Board" please. Link; PIC Analogue Calibration (75% off) (picaxestore.com) (Out of stock). The problem; It's loading the circuit under test (Picaxe light sensor 08M2 pin C.4). With nothing connected to the Analogue Calibration Board...
Top