Recent content by ZL2UFW

Hi All. I wish to use a 28x with ver 7.3. Firmware. Is there a link to a version of BAS805.exe somewhere that will enable to do this, the latest version wont allow me to do so. Thanks...Terry.

Compiler works no problems. (all functions used including kate) command line used, ./picaxe18x -c/dev/ttyS1 test.bas Distro, debian sid (unstable), linux-image 2.6.25-2-686, kde etc. Running on a 2.4 gig P4 with 512mb ram, 60gb hdd Terry.

Hi, I cannot get a LCD display to work with a 40x1 picaxe. The board is OK as the display works with a 40x picaxe and I have had a scope on all of the data pins and there is data on the pins from the 40x1. I have also tried increasing the delays in the "init" subroutine. Both are...

This is a rally car project for a tripmeter with resolution down to 10 metres. The problem I have is to calibrate it to the required accuracy. There are 2706 clock cycles per Km so every 10 metres there are 27.06 clock cycles so I lose 6 meters every km because of the interger. to get accuacy...