I'm building a wireless IR sensor for a alarm to let me know when granny's on the loose at night. I wanted to use a 4 channel push button remote and receiver that i had.
I hooked the receiver to a 8 pin picaxe and coded the alarm side. Thats working great, if you push the button on the remote...
Sorry for the lack of detail. I'm trying to use two light dependent resistors mounted on a servo to track the sun or a light source.
The LDR's would be in series creating a voltage divider. One end would go to + and the other - .The middle were they meet would go into the
ADC input where it...
I've been trying to program a sun tracker using a 18pin m2 with a servo and two LDR's on a ADC pin
I'm still learning on the programing side and would love to have some help.
I cant get the servo to step one degree in a direction. I can move to any angle at once,
but I'm trying just to step 1...
attached is a image of what ive done to this point.as you can see in the image the lcd is showing 0000000000.
Its running the second program in the origanal post
This is probably a really stupid question but i cant get my temp sensor working for nothing!!
just trying the basic readtemp to a debug the read.
I'm using a picaxe 18m2 with the One Wire Digital Temperature Sensor - DS18B20
ive tried...
main:
readtemp b4,b0
sertxd (“The value is...
I'm fairly new with the picaxe chip but I have the basics of the basics down.
I'm tying to get working a serial LCD from sparkfun.
www.sparkfun.com/datasheets/LCD/SerLCD_V2_5.PDF
I'm running a 18m2 picaxe and I'm only trying to get it to say "Hello" but I've been trying for two...
I want to create a game like jeopardy. You'll have 4 separate input push buttons for each player and when a question is asked only the fastest persons button will latch and light ther 1 of 4 inputs LEDs and maybe a buzzer will buzz, then it wall go back into waiting state. I cant figure out how...
im using a 08 Proto Board and i connected a pizeo motion sensior to the adc4 input when it gets touched it turns on an led. Works perfect untill i unplug the programing cable. The adc go's from 0 to 255 and the project wount work. Plug it back in and it works perfect every time. The only thing...