Recent content by newbe

I tried both codes not seem to work yet for me It could be other problems on my end .I havent done alot of electronics lately .For now I will use a heated fuel system .I fuel my truck and heat 2 homes on free vegtable oil The heating systems I have made are large heavy expensive .I have...

Thanyou very much I will try that code tomorrow

I can change pic input high or low I do not need duty cycle adjustable 40 percent will do

The output of pump wires 12 volt pulse from 2 to 7 pulses per second maintaining 20 percent duty cycle .I need pic to follow pump pulse rate at 40 percent duty. I have aliexpress PWM with adjustable duty cycle its duty cycle stays at set rate when increasing pulse rate but no way of it...

I need help with this its for a diesel parking heater to run on vegtable oil it is to thick to pump at the heaters 20 percent duty cycle pulse . I need code to make 0m8 stretch the pump pulse to 40 percent duty or adjustable with pot the pump rate vary s 1 to 6 a second

Cant figure how! I have a switch that can be on or off + or - I need a code for prefer om8 or 20m2 if pin2( =1 ) steady state always on ) high pin3 wait 2 low pin3 ( stop meaning do once like pause for any time up to 23hours ) then if state of pin 2 toggles changes steady...