neiltechspec's latest activity

Ended up using readadc10 & required calc. Updated the code above. Works well.

Thanks hippy, look interesting. I'll try it on the H/W tomorrow. for info, entire code is here. #rem 7 Seg Com Anode display direct...

Yet again I seem to be struggling with maths. Built a Wideband AFR guage that displays 0v to 5v as 10 to 20 AFR. This used...

I use an FRAM (MB85RC256V) in my electronic speedo / odo. Make sure it's a genuine Fujitsu chip and not a cheap chinese clone. Writes...

Excellent to find the real cause of the problem, just unfortunate it's "toast".

You aren't telling the cursor to move to line 2, or even telling it to start on line 1 either. (254,128,"line 1 text") (254,192,"line 2...

That's where I saw it. Used the updated one many times myself. Thanks for sharing the code Alan.

Looking at the data sheet for the chip, no other pins are needed for I2C. It may be just for setting the device address, try a i2c...